Aluminium Counterflow Heat Exchanger

The aluminum plate counterflow heat exchanger with high efficiency up to 93%. A great solution for premises with a small amount of the incoming/exhaust air.

Aluminium-plate-counterflow-heat-exchanger-ericorporation

Aluminium Counterflow Combi Heat Exchanger

Our Combi recuperator for air distribution connected to two similar heat exchangers in parallel. The whole combination package is made of seawater resistant aluminum. Minimum efficiency value 67%. HVAC ventilation systems up to 40.000 M3/H.

Aluminium-counterflow-combi-heat-exchanger-ericorporation

Aluminium Cross-flow Plate Heat Exchanger

Recuperative heat exchanger, in which the explicit and latent heat is transferred directly from the exhaust air to the supply air through a heat exchanger walls without moisture transfer.

Aluminium-crossflow-heat-exchanger-ericorporation

ROTARY HEAT EXCHANGER

The basis of the rotary heat exchanger - aluminum, due to its properties can achieve efficiencies up to 85%. Available in customized frame size and different widths.

Rotary-heat-exchanger-ericorporation

ACCUAIR - SLUICE ENTHALPY REGENERATOR

It has an efficiency of up to 90%, thanks to the accumulating mass of high thermal sensitivity. Frost resistant up to a temperature of – 25°C. The value of the recovery of moisture exceeds 70%. Characterized with big air value and compact size the same time.

Sluice-enthalpy-regenerator-for-supply-exhaust-units-ericorporation

BALL SIPHON

The siphon is used to drain condensation in air conditioning systems, made from propylene, resistant to corrosion. It can be used at a maximum pressure of 2200 Pa.

Ball-siphon-ericorporation

MK SIPHON

Connector is made of polypropylene, which is resistant to corrosion and decay, is used for removing condensate in a low-pressure air-conditioning systems. Maximum pressure 2200 Pa.

MK-siphon-ericorporation
BENEFITS

BENEFITS WORKING WITH US

Certification under market conditions is of great importance: it increases consumer’s trust in the quality, the choice of the necessary product for the consumer becomes easier, and most importantly - is the availability of objective information about the quality of provided products.

ECO Design 1253

Since 01.01.2016 was entered into force the ECO Design Directive 1253 of the European Commission for AHU installations. Our products fulfill the ECO Design requirements.

SELECTION SOFTWARE

Our stand-alone selection software introduce you the possibility to make the right choice. We have developed special tools to integrate DLL to your systems in case of programming platforms. Our platform is already integrated to AirCalc or to similar systems by request.

CERTIFICATES

Our calculation software for Counter-flow Plate Heat Exchangers passed test in Eurovent and TÜV SÜD certification center. The performances of our Counter-flow Plate Heat Exchangers correspond thus to international standards.

KNOWLEDGE EXCHANGE

ERI Corporation staff with great pleasure ready to give you all necessary information about our products and how it can be useful for ventilation systems.

TECHNICAL SUPPORT

We provide consultations concerning the proper use of our products. You can write email, or call us and we solve your problem as soon as possible. Our support team is always ready to help you.

INNOVATIONS

Step by step we are getting closer to perfection. We are developing new approaches to implement it into design and manufacturing, use the most advanced technologies to increase quality level.